S9V11F3S5 3.3V Step-Up/Step-Down Regulator

• Input voltage: 2 V to 16 V
• Fixed 3.3 V output with +5/-3% accuracy (can be changed to 5 V using the SEL pin)
• Typical maximum continuous output current: 1.5 A

The S9V11F3S5 3.3V Step-Up/Step-Down Regulator produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that). The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.

Features

• Power-good indicator can be used to tell when the regulator has reached and is maintaining its target output voltage
• Power-saving feature maintains high efficiency at low currents (quiescent current is less than 1 mA while enabled and approximately 7 µA per volt on VIN when the regulator is disabled)
• Integrated over-temperature and short-circuit protection
• Small size: 0.5″ × 0.6″ × 0.17″ (12.7 × 15.3 × 4.3 mm)